'58 project car, parting out, no body
03-28-2011, 10:17 AM
#1
Former Vendor
Thread Starter
'58 project car, parting out, no body
Will part out
Photo link added----Please click below
http://smg.photobucket.com/albums/v6...20sale%201958/
Update: Body is SOLD---Thanks Dennis.
Update---Rolling chassis is sold.----283/230HP/auto DG pad, 519 block, dated and coded for this car (looks original, but I have no way to verify)
Engine/trans/rear end/frame/suspension/exhaust refurbished.---SOLD
SOLD---Body photos below:---Body is SOLD.
Needs front fiberglass--has inner fenders in place, so just the top surround/front fenders needed---I may have a line on these pieces and will install when/if I get them.
Would like to sell as is----no interior, no gauges, needing body and paint work, no chrome, no stainless, no windshield frame or windshield, no hubcaps. Body is SOLD---
SOLD---Body only---$2,750.00 (no hood--hood is SOLD)---Body is SOLD
SOLD---$4,500.00 Complete rolling chassis with engine and transmission---$4,500.00---SOLD
$3,750.00 Minus engine/trans/exhaust
$3,000.00 Bare frame---SOLD
I do have everything for this Vette that can be sold as per the buyer's wishes/needs.
1) driver condition and re-chromed bumpers---Have sold some front bumpers--Have two more sets. Fronts $375.00--Rears $650.00 each.
2) seat frames and springs, and restored complete seat assemblies---These are refurbished by Al Knoch---$3,000.00
3) (sold) restoreable soft top frame (sold) and hard top, and restored soft top frame and hard top.---Restored hard top is sold, have another hard top.
SOLD---Soft top frame and body brackets are sold---Sale pending on new soft top frame. Sale pending on soft top frame body brackets. ---Sold.
4) new windshield---$300.00 OBO
5) restored windshield frame, complete, beautiful---$2,000.00; and door posts---$175.00 to $300.00
6) driver and perfect hubcaps---$50.00 per driver cap, $100.00 per repop cap, $125.00 per beautiful original cap---Have 12 caps. Some '58, some '59, and some Big Brake caps ((driver condition--$75.00 per), also have some '57 Big Brake caps.
7) restore-able head light assemblies and restored assemblies.---$100.00 and up.
8) restore able stainless and restored pieces. Have top surround pieces, side body side pieces, door spears, hard top pieces, soft top pieces, etc.
9) Very nice tail light assemblies and restore able assemblies-----$100.00 and up
10) new exhaust pipes and mufflers (3 sets).--New Corvette Central complete assemblies with or without hanger kits--All at 65% of catalog prices. these are new, unused
11) Restore able front grill parts/pieces
12) Sold-- reproduction (I think?) thunk irons--Very nice.--$600.00 Sold
13) restored gauge/speedo housings with instruments. Nice complete unit---$1,150.00--other gauges and radios available.
14) new Al Knock deluxe interior---complete----SOLD--door panels (door panels are sold), SOLD--dash pad--$350.00 SOLD, carpet--$175.00, soft top canvas (Dated early '58) ---150.00, kick panels---$200.00, passenger tray and insert assembly---$155.00, restored complete seat assemblies mentioned above---$3,000.00, repro seat belts--$60.00 and anchors---$20.00, etc., etc.
15) extra '58 only bumper brackets, another "P" posi carrier, several 2x4 intake manifolds and period SOLD--correct carbs., air cleaners SOLD--carbs and air cleaners SOLD--, generators, distributors, another auto trans and block coupler, a '58 4 speed and bell housing, original '58 shifter and linkage, extra engine mounts, some misc. fiberglass panels and pieces, weather stripping, exhaust manifolds, pulleys, wheels, clocks, gauges, voltage regulators, ----the list goes on and on.
Body is SOLD.
http://smg.photobucket.com/albums/v6...20sale%201958/
Please e me at geopar@gvtc.com
Thanks,
George
210 748 4693
Photo link added----Please click below
http://smg.photobucket.com/albums/v6...20sale%201958/
Update: Body is SOLD---Thanks Dennis.
Update---Rolling chassis is sold.----283/230HP/auto DG pad, 519 block, dated and coded for this car (looks original, but I have no way to verify)
Engine/trans/rear end/frame/suspension/exhaust refurbished.---SOLD
SOLD---Body photos below:---Body is SOLD.
Needs front fiberglass--has inner fenders in place, so just the top surround/front fenders needed---I may have a line on these pieces and will install when/if I get them.
Would like to sell as is----no interior, no gauges, needing body and paint work, no chrome, no stainless, no windshield frame or windshield, no hubcaps. Body is SOLD---
SOLD---Body only---$2,750.00 (no hood--hood is SOLD)---Body is SOLD
SOLD---$4,500.00 Complete rolling chassis with engine and transmission---$4,500.00---SOLD
$3,750.00 Minus engine/trans/exhaust
$3,000.00 Bare frame---SOLD
I do have everything for this Vette that can be sold as per the buyer's wishes/needs.
1) driver condition and re-chromed bumpers---Have sold some front bumpers--Have two more sets. Fronts $375.00--Rears $650.00 each.
2) seat frames and springs, and restored complete seat assemblies---These are refurbished by Al Knoch---$3,000.00
3) (sold) restoreable soft top frame (sold) and hard top, and restored soft top frame and hard top.---Restored hard top is sold, have another hard top.
SOLD---Soft top frame and body brackets are sold---Sale pending on new soft top frame. Sale pending on soft top frame body brackets. ---Sold.
4) new windshield---$300.00 OBO
5) restored windshield frame, complete, beautiful---$2,000.00; and door posts---$175.00 to $300.00
6) driver and perfect hubcaps---$50.00 per driver cap, $100.00 per repop cap, $125.00 per beautiful original cap---Have 12 caps. Some '58, some '59, and some Big Brake caps ((driver condition--$75.00 per), also have some '57 Big Brake caps.
7) restore-able head light assemblies and restored assemblies.---$100.00 and up.
8) restore able stainless and restored pieces. Have top surround pieces, side body side pieces, door spears, hard top pieces, soft top pieces, etc.
9) Very nice tail light assemblies and restore able assemblies-----$100.00 and up
10) new exhaust pipes and mufflers (3 sets).--New Corvette Central complete assemblies with or without hanger kits--All at 65% of catalog prices. these are new, unused
11) Restore able front grill parts/pieces
12) Sold-- reproduction (I think?) thunk irons--Very nice.--$600.00 Sold
13) restored gauge/speedo housings with instruments. Nice complete unit---$1,150.00--other gauges and radios available.
14) new Al Knock deluxe interior---complete----SOLD--door panels (door panels are sold), SOLD--dash pad--$350.00 SOLD, carpet--$175.00, soft top canvas (Dated early '58) ---150.00, kick panels---$200.00, passenger tray and insert assembly---$155.00, restored complete seat assemblies mentioned above---$3,000.00, repro seat belts--$60.00 and anchors---$20.00, etc., etc.
15) extra '58 only bumper brackets, another "P" posi carrier, several 2x4 intake manifolds and period SOLD--correct carbs., air cleaners SOLD--carbs and air cleaners SOLD--, generators, distributors, another auto trans and block coupler, a '58 4 speed and bell housing, original '58 shifter and linkage, extra engine mounts, some misc. fiberglass panels and pieces, weather stripping, exhaust manifolds, pulleys, wheels, clocks, gauges, voltage regulators, ----the list goes on and on.
Body is SOLD.
http://smg.photobucket.com/albums/v6...20sale%201958/
Please e me at geopar@gvtc.com
Thanks,
George
210 748 4693
Last edited by Corvettes by George; 11-05-2013 at 06:32 AM.
07-22-2011, 10:05 AM
#8
Former Vendor
Thread Starter
Photo link added---Please click below----Will part out
http://smg.photobucket.com/albums/v6...ter/Corvette%2
Well, general breakdown of components is as follows:
1) Restored rolling chassis----Frame blasted and painted, all suspension rebuilt, rear end rebuilt, brake system restored-----Easily $6,500.00--for sale at $5,500.00 Includes matching number engine and trans.
2) '58 body with good title----repop louvered hood--(hood sale is pending), original trunk lid, good doors, good inner fenders, good deck lid, fiberglass fuel tank, includes lower fenders and gas tank cover (not shown in photos), two top car so it has all brackets and braces(soft top brackets and braces are pending sale) for the soft top installation---Easy $5000.00---Body with doors, deck lid, trunk lid for sale at---New Price (hood and soft top brackets sold) $2,800.00.
Plus: After market A/C system---for sale at $450.00, misc. stainless. for sale--prices vary, but have top surround trim, door trim, door spears, etc--Prices vary.
I do have other parts for this car that can be added to the deal.
Including but not limited to:
seats and frames------New, Al Knoch, ---$3,000.00
bumpers and brackets---Re chromed--fronts $400.00, rears--$650.00----Driver fronts--$250.00 Driver rears--$400.00
dash instrument housing (complete, restored)--Very nice complete---$1,200.00
Sold--new soft top frame $2,200.00 --Sale pending.---SOLD
windshield frame assembly--Very nice, restored--$2,000.00
door posts---$175.00 to $300.00
Sold--trunk irons--Reproductions, very nice---$600.00--SOLD
grill pieces,
Sold--radio---$550.00--Sold
new complete Al Knoch interior (Charcoal)--Door panels are sold, dash pad, carpet, package tray and insert and insert frame, grab bar, kick panels, etc.. for sale at 75% of catalog price.
tail light assemblies--nice and driver's--$100.00 to $300.00
headlight assemblies--some nice and some repairable---offer
etc., etc.
Thought this might be a good start for a restomod project---Buyer could sell off the frame/suspension/engine-trans, etc.
Or, a good start for a daily driver by someone who had access to the needed parts, and who did his/her own work.
George
geopar@gvtc.com
210 748 4693
http://smg.photobucket.com/albums/v6...ter/Corvette%2
Well, general breakdown of components is as follows:
1) Restored rolling chassis----Frame blasted and painted, all suspension rebuilt, rear end rebuilt, brake system restored-----Easily $6,500.00--for sale at $5,500.00 Includes matching number engine and trans.
2) '58 body with good title----repop louvered hood--(hood sale is pending), original trunk lid, good doors, good inner fenders, good deck lid, fiberglass fuel tank, includes lower fenders and gas tank cover (not shown in photos), two top car so it has all brackets and braces(soft top brackets and braces are pending sale) for the soft top installation---Easy $5000.00---Body with doors, deck lid, trunk lid for sale at---New Price (hood and soft top brackets sold) $2,800.00.
Plus: After market A/C system---for sale at $450.00, misc. stainless. for sale--prices vary, but have top surround trim, door trim, door spears, etc--Prices vary.
I do have other parts for this car that can be added to the deal.
Including but not limited to:
seats and frames------New, Al Knoch, ---$3,000.00
bumpers and brackets---Re chromed--fronts $400.00, rears--$650.00----Driver fronts--$250.00 Driver rears--$400.00
dash instrument housing (complete, restored)--Very nice complete---$1,200.00
Sold--new soft top frame $2,200.00 --Sale pending.---SOLD
windshield frame assembly--Very nice, restored--$2,000.00
door posts---$175.00 to $300.00
Sold--trunk irons--Reproductions, very nice---$600.00--SOLD
grill pieces,
Sold--radio---$550.00--Sold
new complete Al Knoch interior (Charcoal)--Door panels are sold, dash pad, carpet, package tray and insert and insert frame, grab bar, kick panels, etc.. for sale at 75% of catalog price.
tail light assemblies--nice and driver's--$100.00 to $300.00
headlight assemblies--some nice and some repairable---offer
etc., etc.
Thought this might be a good start for a restomod project---Buyer could sell off the frame/suspension/engine-trans, etc.
Or, a good start for a daily driver by someone who had access to the needed parts, and who did his/her own work.
George
geopar@gvtc.com
210 748 4693
Last edited by Corvettes by George; 08-18-2012 at 02:27 PM.
07-24-2011, 08:04 PM
#9
Burning Brakes
Member Since: Jan 2010
Location: Murfreesboro TN
Posts: 763
Likes: 0
Received 0 Likes
on
0 Posts
Well, general breakdown of components is as follows:
1) Restored rolling chassis----Frame blasted and painted, all suspension rebuilt, rear end rebuilt, brake system restored-----Easily $4,500.00
2) '58 body with good title----repop louvered hood, original trunk lid, good doors, good inner fenders, good deck lid, fiberglass fuel tank, includes lower fenders and gas tank cover (not shown in photos), two top car so it has all brackets and braces for the soft top installation---Easy $5000.00
3) Rebuilt engine and automatic transmission----including generator with tach drive, radiator/radiator support/shrouding, new exhaust system, etc.
Have you priced a '58 automatic transmission lately?--Easy $5,000.00 for this package.
Plus: After market A/C system, new wheels and tires (5), misc. stainless.
That's another $2,000.00
Sum of above: $16,500.00-----$10,000.00 should be a good price.
I do have other parts for this car that can be added to the deal.
Including but not limited to:
seats and frames
bumpers and brackets
dash instrument housing (complete, restored)
new soft top frame
windshield frame assembly
door posts
trunk irons
grill pieces,
radio
new complete Al Knoch interior (Charcoal)
tail light assemblies
headlight assemblies
etc., etc.
Thought this might be a good start for a restomod project---Buyer could sell off the frame/suspension/engine-trans, etc.
Or, a good start for a daily driver by someone who had access to the needed parts, and who did his/her own work.
1) Restored rolling chassis----Frame blasted and painted, all suspension rebuilt, rear end rebuilt, brake system restored-----Easily $4,500.00
2) '58 body with good title----repop louvered hood, original trunk lid, good doors, good inner fenders, good deck lid, fiberglass fuel tank, includes lower fenders and gas tank cover (not shown in photos), two top car so it has all brackets and braces for the soft top installation---Easy $5000.00
3) Rebuilt engine and automatic transmission----including generator with tach drive, radiator/radiator support/shrouding, new exhaust system, etc.
Have you priced a '58 automatic transmission lately?--Easy $5,000.00 for this package.
Plus: After market A/C system, new wheels and tires (5), misc. stainless.
That's another $2,000.00
Sum of above: $16,500.00-----$10,000.00 should be a good price.
I do have other parts for this car that can be added to the deal.
Including but not limited to:
seats and frames
bumpers and brackets
dash instrument housing (complete, restored)
new soft top frame
windshield frame assembly
door posts
trunk irons
grill pieces,
radio
new complete Al Knoch interior (Charcoal)
tail light assemblies
headlight assemblies
etc., etc.
Thought this might be a good start for a restomod project---Buyer could sell off the frame/suspension/engine-trans, etc.
Or, a good start for a daily driver by someone who had access to the needed parts, and who did his/her own work.
This is a good price, but I don't have the space to take on anymore projects and to be honest, I am looking for an 58-62 that came with a stick originally.
My Dad just picked up a driver 55 Ford Thunderbird 3 speed w/ overdrive and we are currently rebuiding the suspension, etc.
08-06-2011, 10:54 AM
#10
Former Vendor
Thread Starter
Please see updates to original posts----added photobucket link and am now considering parting this out.
While in photobucket, take a look at all of my albums. A few things for sale.
Thanks,
George
210 748 4693
geopar@gvtc.com
While in photobucket, take a look at all of my albums. A few things for sale.
Thanks,
George
210 748 4693
geopar@gvtc.com
08-06-2011, 02:33 PM
#11
Le Mans Master
Shame to see it parted, I hope it sells!
You could have added "I will continue to improve this car until it's $60K like everyone else is asking." (a little off-topic humor for those following other threads- this car is a very worthy start indeed)
You could have added "I will continue to improve this car until it's $60K like everyone else is asking." (a little off-topic humor for those following other threads- this car is a very worthy start indeed)
08-13-2011, 10:04 AM
#13
Former Vendor
Thread Starter
[quote=Texas Stinger;1578373725]
What all are you missing from making a complete car?
The only things I do not have to make this a complete car are the front fiberglass panels.
What would you take with everything you have towards making it complete?
I think you could purchase a complete car for less money, but I'd consider $25K.
Thanks,
George
210 748 4693
geopar@gvtc.com
What all are you missing from making a complete car?
The only things I do not have to make this a complete car are the front fiberglass panels.
What would you take with everything you have towards making it complete?
I think you could purchase a complete car for less money, but I'd consider $25K.
Thanks,
George
210 748 4693
geopar@gvtc.com