When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I agree with the above post, this is VERY cool, both projects are...this is the kind of stuff that gets me inspired. One quick thought...although it would "reduce" flow to runners (like #1 & #8), perhaps with testing you could tune each runner using a specific donut diameter to make them all equal!? And to really make them completely balanced, flow them through the heads as well, to factor in its runners...at the same time? You may give up a little CFM to some, but with enough effort, you could "truly" have each cylinder flowing the same #s! I would think they're aren't too many engines out there, that this is actually the case, this seems like it would be absolutely optimal! Like I said, just a thought, maybe I'm overlooking or missing something....at any rate, keep it up, this next level stuff is awesome👍
number will most likely change in the plenum. just never know. love this stuff
One quick thought...although it would "reduce" flow to runners (like #1 & #8), perhaps with testing you could tune each runner using a specific donut diameter to make them all equal!? And to really make them completely balanced, flow them through the heads as well, to factor in its runners...at the same time?
Yes ...
That's why I made them removable, press fit.
Plan to print out several different size sets, mix and match.
Finished printing out and welding together the top plenum.
Dusted it silver and sat it on the injectors to get a feel for what it is going to look like.
A little worried that I'm not hearing from the vendor printing out the plenum base
Started my own two half's plenum base just in case he doesn't come through.
Finished printing out and welding together the top plenum.
Dusted it silver and sat it on the injectors to get a feel for what it is going to look like.
A little worried that I'm not hearing from the vendor printing out the plenum base
Started my own two half's plenum base just in case he doesn't come through.
06-17-2024, 01:59 PM
