*** Edelbrock E-Force LS3 Install Special [PICS] - Pre-Order your LS2 Now! ***
08-09-2010, 10:27 PM
#61
Race Director
Thread Starter
Member Since: Sep 2003
Location: Now in God's Country, the Big Sky, Montana!
Posts: 13,550
Likes: 0
Received 4 Likes
on
4 Posts
Cruise-In 7-8-9-10 Veteran
St. Jude Donor '06-'07-'08-'09-'10-'11-'12
A little birdie told me they were shipping tomorrow.
08-10-2010, 09:36 AM
#62
Moderator/Tech Contributor
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,480
Received 3,878 Likes
on
2,096 Posts
2015 C7 of the Year Finalist
Don't play with me! I've had a triple bypass and my wife will get you if you "promise" me into a dirt nap! 
Elmer
Elmer
08-11-2010, 10:36 AM
#64
Moderator/Tech Contributor
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,480
Received 3,878 Likes
on
2,096 Posts
2015 C7 of the Year Finalist
I am such a pest. Hm... Is that a twinge I feel in my chest? Where's that darn defibrillator? It was in the tool box with the air tools.... Anyone know that new hands only CPR?
08-11-2010, 10:51 AM
#66
Moderator/Tech Contributor
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,480
Received 3,878 Likes
on
2,096 Posts
2015 C7 of the Year Finalist
Wait! I'm feelin better I'm
I've got that greasy feelin wo oh woh that greasy feelin....
I've got that greasy feelin wo oh woh that greasy feelin....
09-01-2010, 02:17 PM
#68
Supporting Tuner
EnglandGreen's first LS2 Edelbrock E Force has been completed!
This 2007 Vette is bone stock except for the Edelbrock E-Force supercharger. It responded well and made 501rwhp and 505rwtq - a gain of 139 horsepower and 139 ft. lb. of torque! This was in sweltering 103 degrees F on our dyno with 89% humidity.
This 2007 Vette is bone stock except for the Edelbrock E-Force supercharger. It responded well and made 501rwhp and 505rwtq - a gain of 139 horsepower and 139 ft. lb. of torque! This was in sweltering 103 degrees F on our dyno with 89% humidity.
Last edited by EG@EnglandGreen; 09-01-2010 at 02:21 PM.
09-20-2010, 12:03 PM
#69
Supporting Tuner
Another Edelbrock E Force LS3 kit came in 
Stephen
Stephen
09-23-2010, 05:17 PM
#71
Supporting Tuner
We received an email from Edelbrock a couple of days ago and it stated that the LS7 kit will ship late October, early November.
Stephen
Stephen
09-23-2010, 07:29 PM
#72
Advanced
10-20-2010, 08:14 PM
#73
Supporting Tuner
Jim - 2008 MN6 LS3 Corvette with Edelbrock E-Force supercharger, 3 inch pulley, EnglandGreen Havoc cam, Textralia OZ-700 clutch, American Racing headers, high flow metal matrix cats and Corsa Extreme catbacks.
600 horsepower and 587 foot pounds of tire shredding torque - at the wheels!!!
Approx. 690 horsepower and 675 torque at the crank!
A gain 244 horsepower and 202 ft-lb of torque. This Vette pulls like a freight train.
600 wheel horsepower from our solid combination of EnglandGreen Havoc "blower" cam, American Racing headers and Edelbrock E-Force supercharger with 10 pounds of boost on a safe conservative custom EG tune with only 9 degrees of timing on 93 octane pump gas!
600 horsepower and 587 foot pounds of tire shredding torque - at the wheels!!!
Approx. 690 horsepower and 675 torque at the crank!
A gain 244 horsepower and 202 ft-lb of torque. This Vette pulls like a freight train.
600 wheel horsepower from our solid combination of EnglandGreen Havoc "blower" cam, American Racing headers and Edelbrock E-Force supercharger with 10 pounds of boost on a safe conservative custom EG tune with only 9 degrees of timing on 93 octane pump gas!
12-09-2010, 01:42 PM
#75
Supporting Tuner
12-20-2010, 04:15 PM
#76
Supporting Tuner
