Fiberglass Bumps - Header Bar 69
#1
Intermediate
![](/forums/images/ranks/100-500.gif)
![](/forums/images/ranks/100-500.gif)
Thread Starter
Member Since: Dec 2006
Location: Luray VA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
My 69 has bumps in the surface above the front header bar.
The rivet heads have rusted and swelled up causing the bumps.
Does anyone know how to fix this?
I would assume the rivets have to be removed through holes in the surface and then repair the holes. Is this the best approach??
Ed
The rivet heads have rusted and swelled up causing the bumps.
Does anyone know how to fix this?
I would assume the rivets have to be removed through holes in the surface and then repair the holes. Is this the best approach??
Ed
#2
Burning Brakes
![](/forums/images/ranks/1k-2k.gif)
![](/forums/images/ranks/1k-2k.gif)
![Default](https://www.corvetteforum.com/forums/images/icons/icon1.gif)
My 69 has bumps in the surface above the front header bar.
The rivet heads have rusted and swelled up causing the bumps.
Does anyone know how to fix this?
I would assume the rivets have to be removed through holes in the surface and then repair the holes. Is this the best approach??
Ed
The rivet heads have rusted and swelled up causing the bumps.
Does anyone know how to fix this?
I would assume the rivets have to be removed through holes in the surface and then repair the holes. Is this the best approach??
Ed
http://forums.corvetteforum.com/show...ht=truth+bumps